|
||||||||||
     |
||||||||||
 |
 |
 |
 |
 |
 |
 |
||||
 |
||||||||||
 DATALOGGER
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pressure Meters
Portable Datalogger| MLLINK | PC Interface for MonoLog 2 and i-Log Series |
| MA-SWP-WIN | Software for MonoLog 2 and i-Log Series |
| MLLINKACAD | Adaptor Interface for MLTACXZY2 |
| MLTCAD | Adaptor Interface for MLTXV16SI |
| MLTXDPROBE | Spare probe for MLTXD16(L) - MLTXXD16(L) |
| MLKEY | Start magnet key ring |
| ML-HOLD | Wall mounting bracket |
| ML-ALARM Alarm interface that accommodates any standard MonoLog 2 datalogger and generates volt free relay when parameters are reached |
|
| STORAGE TEMPERATURE | -40°C to +85°C |
| ALARM OUTPUT | NA / NO, 0.5 @ 24VDC |
| IP RATING | IP51 |
| POWER REQUIREMENTS | 9-24 Volt DC, 100mA |
| WEIGHT | 50 gr |
| SIZE | Ø 80mm, H 35mm |
| MLCR & MLCR-MEM Chart Reader (Portable printer) |
|
| OPERATING TEMPERATURE | 0 +50°C/32°F +122°F |
| PRINTER | Inkjet |
| SPEED | 3.4 lines/sec (equiv. to 1333 data/min) |
| LED | Green LED = Active/Red LED = Alarm |
| MEMORY | MLCR 16KB Volatile memory for 1 logger |
| IP RATING | IP50 |
| POWER | Rechargeable NiCad battery |
| RECHARGE TIME | 90% in 1 hour approx |
| BATTERY LIFE | 1 hour approx of continuous printing |
| RECHARGE | Adapter Rating 12 Volt @ 1 Amp |
| WEIGHT | 1.125 kg (2.5 lbs approx) |
| SIZE | Lung 225mm, Larg 120mm, H 75mm |
MLCR-MEM 1MB |
ACCESSORIES AND SOFTWARE
Specification:
PC Interface MLLINK PC-Interface. Connects to serial port on PC via DB9 connector. |
||
| WEIGHT | 134 gr. |
 |
| SIZE | ø85mm Ht.29mm | |
Specification:
PC Interface adaptor MLLINKACAD - Interface adaptor for Autoclave datalogger |
||
| WEIGHT | 124 gr. |
|
| SIZE | ø85mm Ht.26mm | |
Specification:
Start Magnet MLKEY - Start Magnet. Allows loggers to be manually activated |
||
| WEIGHT | 36 gr. |
 |
| SIZE | ø31mm Ht.5mm | |
Specification:
ChartReader handheld, portable printer MLCR - Handheld, portable printer for on-site reading of MonoLog 2 Dataloggers. Printing of list or graph. Allows internal storage of multiple logger data for immediate printing or later transfer to PC. Prints on duplicate paper. |
||
| MEMORY | MLCR - 16,000 readins volatile memory MLCR-MEM - 1MB non-volatile memory for approximately 65 x 16k datalogger |
 |
| BATTERY TYPE & LIFE | Rechargable NiCAD battery/1 hour continuous printing | |
| IP RATING | IP50 | |
| WEIGHT | 1.125 kg. | |
| SIZE | 225x120x75mm | |
MLSWARE
- Software Features |
|
|
Multiple Languages including English, French, German, Dutch,
Italian, Spanish. |
|
Statistical Analysis including
min, max and average of all readings. |
|
Console Software User Admin Package
for compliance with US FDA Title 21 CFR Part 11 |
|
User Defined Calculations e.g.
Fresh Values, Pasteurisation units. |
|
Data Export to other generic software
such as Excel |
|
Dynamic Link Library for third
party software development. |
|
Graph Editing: Inserting additional explanations and headings into the graphical display of a logging cycle. Also enables User to change the graph format. |
|
Multi-Link: Showing measurements of different loggers in the same data analysis window, for example in graph and list modes. |
|
Multiple Graphing Facility to display
trips from multiple loggers on a single graph. |
|
 |
We work hard to maintain our high Quality Standards Click here to find out more about our Quality Accreditations |
 |
 |
| Digitron Italia | Strada ASI Consortile, 7 - Loc. Torrefessa F. 03013 FERENTINO (FR) P.IVA 02270700608 Tel: +39 0775 392052 Fax: +39 0775 223835 E-mail: info@digitron-italia.it |
|