|
||||||||||
     |
||||||||||
 |
 |
 |
 |
 |
 |
 |
||||
 |
||||||||||
 INFRARED THERMOMETERS
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pressure Meters
Infrared Thermometers| Monitoring temperature is essential to keeping food safe. Regular monitoring of temperatures and adherence to food safety guidelines make for better business—increasing food safety and reducing food waste. The FoodPro Series of thermometers provide a complete temperature measurement and monitoring solution for food service professionals. It is fast and easy to adhere to safety guidelines with the HACCP Check provided in each unit. Both FoodPro and FoodPro Plus thermometers provide quick scans of food surface temperatures. The FoodPro Plus also features a probe for verifying internal temperatures, plus a timer to monitor food exposure times.
The HACCP Check The HACCP Check“Go/No-Go” lights show immediately if temperatures are within HACCP guidelines for safe hot or cold food holding. A green light indicates safe hot and cold holding temperatures, while potentially dangerous food temperatures trigger a red light. |
 |
Key Features • Quickly Scan surface temperatures without risk of cross contamination |
|
The FoodPro is a reliable and east-to-use contact thermometer scanner for every food service worker for a first check of risky temperatures. FoodPro quickly measures food surface temperature and signals “safe” or “unsafe” readings with green or red HACCP Check lights. It is a perfect temperature monitoring companion to contact thermometers commonly used in many food service organisation. Food Pro Plus The FoodPro Plus combines two temperature measurement technologies into one easy-to-use tool - a non-contact thermometer for instant scanning and measurement of surface temperatures, plus a built-in, flip-down probe thermometer for taking internal temperature measurements. The HACCP Check indicates at a glance whether foodtemperatures are in safe ranges, and the integrated timer helps monitor cooking, cooling and holding. The dual mode measurement capability, built in HACCP Check, and integrated timer make FoodPro Plus the professional’s tool of choice in a food safety thermometer. |  |
TECHNICAL FEATURES
| MODEL | FoodPro | FoodPro Plus |
| RANGE | -30ºC to 200ºC | -35ºC to 275ºC |
| ACCURACY (AMBIENT OPERATING TEMPERATURE @ 23ºC ±2ºC) |
0ºC +65ºC: ±1ºC < 0ºC: ±1ºC ±0.1°C > 65ºC: ±1.5% rdg |
0ºC +65ºC: ±1ºC < 0ºC: ±1ºC ±0.1°C > 65ºC: ±1.5% rdg |
| RESPONSE TIME | <500 ms after initial reading | |
| SPECTRAL RESPONSE | 8-14 µm | |
| EMISSIVITY | Pre-set for foodservice applications | |
| DISTANCE TO SPOT SIZE/ OPTICAL RESOLUTION (D:S) |
2.5:1 @ 90% energy, typical | |
| RECOMMENDED WORKING RANGE |
˜25 mm - 250 mm | |
| MINIMUM TARGET SIZE | 12 mm | |
| ILLUMINATION TO IR CHANNEL OF FSET |
13 mm | |
| PROBE | ||
| RANGE | -40ºC + 200ºC | |
| ACCURACY (ASSUMES AMBIENT OPERATING TEMPERATURE OF 23ºC ±2º) |
Between -5ºC and 65ºC: ±0.5ºC Below -5ºC: ±1ºC Above 65ºC: ±1% of reading |
|
| RESPONSE TIME | 7-8 seconds (3 time constants) | |
| PROBE DIMENSIONS | Ø 3 mm - Length: 80 mm | |
| SENSOR TYPE | Thin-film Platinum, Class A, Resistance Thermal Device (RTD) |
|
OPERATIONAL FEATURES
| REPEATABILITY | Within the accuracy specifications of the unit |
| AMBIENT OPERATING RANGE | 0ºC to +50ºC |
| RELATIVE HUMIDITY | 90% (±5%) RH noncondensing @30ºC |
| STORAGE TEMPERATURE | -20ºC to +60ºC |
| WEIGHT (with battery) | 150 gr |
| DIMENSIONS | 150 mm x 30 mm x 50 mm /165 mm x 32 mm x 50 mm |
| BATTERY TYPE | 1 “AA” Alcalina 1 “9V” Alcalina |
| BATTERY LIFE | 10 hours minimum @ 23ºC |
| DISPLAY HOLD (7 SECONDS) |
Yes |
| LCD Backlit Display | Yes |
| TEMPERATURE DISPLAY | 4 digits, 0.2ºC resolution |
| MAX. TEMP. DISPLAYED | Yes |
| TIMER | Integrated countdown timer, adjustable from 10 seconds to 7 hours, 59 seconds. |
| ENVIRONMENTAL | IP54 sealing (hand-washable, non-submersible) |
| CALIBRATION CERTIFICATE |
Calibration accuracy with NIST, and Traceability DKD |
| CE STANDARDS | Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety |
| INCLUDED | Battery, Carrying Pouch, User’s Manual, Quick Start Guide |
| OPTIONS/ACCESSORIES | Replacement Probe |
 |
We work hard to maintain our high Quality Standards Click here to find out more about our Quality Accreditations |
 |
 |
| Digitron Italia | Strada ASI Consortile, 7 - Loc. Torrefessa F. 03013 FERENTINO (FR) P.IVA 02270700608 Tel: +39 0775 392052 Fax: +39 0775 223835 E-mail: info@digitron-italia.it |
|