ADT 919 Pneumatic High Pressure Test Pump -14 psi to 2,000 psi

The ADT 919 Pneumatic High Pressure Test Pump is a hand operated pressure pump designed to generate pressure from -14psi (-0.95bar) to 2000psi (140bar). With a long lever, it just takes 30 seconds to reach 2000 psi (140 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release.
Two hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The ADT 919 is an ideal comparison test pump for pressure instruments calibration.

• High efficency
Generate 2000 psi (140bar) in 30 seconds

• High resolution
10 Pa (0.1 mbar)
High-quality screw press for fine pressure adjustment

• Great Stability
A specially designed shut-off valve makes the pressure stability as high as possible during calibration

• Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from moisture and dirt
The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release

• Easy-to-use

• Finger-tight Connectors
Using your fingers to connect and disconnect gauges quickly and easily without the need for PTFE tape or wrenches

The ADT 919 is designed to generate pressure from 95% vacuum to 2000 psi (140 bar) for the high pressure application requiring accurate pressure testing and calibration. It can be used in calibrating high pressure gauges, transmitters, or other pressure measuring instruments.